任何含有塗層之金屬配件

關於 ” 150 pieces of any painted metal components (e.g. zippers, eyelets, etc.) 任何含有塗層之金屬配件 ( 例 : 拉鍊、環扣、鉚釘或其他 ) ，各 150pcs”, 經與實驗室 check, 拉鍊需送測的是構成拉鍊的金屬部份 , 如下止 (bottom stop) 、拉頭 (slider) 、拉片 (puller), 若有塗層要送各 150pcs, 若沒有則 10pcs 即可 !!

測試 , 除了 3.1 測試要送材料外 , 量產也要送測 , 特再澄清如下 :

3.1 test : 屬開發階段 / 量產前測試階段

( 同一材料用於不同型體 , 材料背面需註明所有 SKU# )

需備如下材料 :

1. 4 A 4 size pieces of material completely covered with screen printed size label

鞋子用到的油墨 , 每一顏色印滿整張 A4 大小 ( 一色印四張 ) ---- 請印 SIZE, 而非用油墨塗滿

2. 4 A 4 size pieces of material with a solid coating of each ink color that is used for sock logo , strap logo, upper logo, edge ink, etc.

鞋墊 LOGO, 鞋面 LOGO 及塗邊用到的油墨 , 均需將油墨塗滿在本來要印刷的材料上，每一顏色需 4 張 *A4 大小

3. 12 pieces of lacquered heel, sprayed outsoles

噴漆鞋跟和大底，各 12pcs

4. 150 pieces of any painted metal components (e.g. zippers, eyelets, etc.)

任何含有塗層之金屬配件 ( 例 : 拉鍊、環扣、鉚釘或其他 ) ，各 150pcs

5. 12 pieces of any metal component that does not have a paint coating.

未烤漆之金屬配件，各 12pcs

6. A5 size piece of each upper, lining, sockliner material.

鞋面，內裡，鞋墊材料， A5 大小 各一張

7. One outsole and midsole (if present) 大底和中底，各 1pc

8. 10 pieces of lace tags, toggles, nylon components, etc.

鞋帶頭，眼扣，尼龍材質相關配件等，各 10pcs

9. 30cm length of components such as touch and close fastener, elastic , laces, etc.

鬆緊帶，鞋帶等繫緊鞋子用之配件，長度需 30C M

10. One pair of finished shoes 一雙成品鞋

11. Specification sheet with correct names

for materials and components including supplier details

客戶的 spec sheet, 材料名稱及供應商資料需正確

3.4 test : Production certification and testing

量產鞋測試證明

防水鞋型 ~ 量產需送一雙測試防水

含鉛測試 (US & Canada orders) ~

1.) 每一型體之量產材料 ( 明細如下所述 )

2.) 送測材料需備註材料名稱 / 用於那些 tracking numbers / 用於那些 PO#

3.) 材料測試 ok 後 , 客戶會通知進行量產 , 每一 tracking number 抽 0.5 雙寄給客戶做含鉛測試

4.) 材料及鞋子均通過測試後 , 客戶才會發出證明 !!

材料明細 :

1. 4 A 4 size pieces of material completely covered with screen printed size label

鞋子用到的油墨 , 每一顏色印滿整張 A4 大小 ( 一色印四張 ) ---- 請印 SIZE, 而非用油墨塗滿

2. 4 A 4 size pieces of material with a solid coating of each ink color that is used for sock logo , strap logo, upper logo, edge ink, etc.

鞋墊 LOGO, 鞋面 LOGO 及塗邊用到的油墨 , 均需將油墨塗滿在本來要印刷的材料上，每一顏色需 4 張 *A4 大小

3. 12 pieces of lacquered heel, sprayed outsoles

噴漆鞋跟和大底，各 12pcs

4. 150 pieces of any painted metal components (e.g. zippers, eyelets, etc.)

任何含有塗層之金屬配件 ( 例 : 拉鍊、環扣、鉚釘或其他 ) ，各 150pcs

5. 12 pieces of any metal component that does not have a paint coating.

未烤漆之金屬配件，各 12pcs

6. A5 size piece of each upper, lining, sockliner material.

鞋面，內裡，鞋墊材料， A5 大小 各一張

7. One outsole and midsole (if present)

大底和中底，各 1pc

8. 10 pieces of lace tags, toggles, nylon components, etc.

鞋帶頭，眼扣，尼龍材質相關配件等，各 10pcs

9. 30cm length of components such as touch and close fastener, elastic , laces, etc.

鬆緊帶，鞋帶等繫緊鞋子用之配件，長度需 30C M

10. One pair of finished shoes from production line for each tracking number

每一 tracking number 需從量產線抽出一雙成品鞋

---