三菱PLC GPPW程式編寫出現的異常

操作GPPW於刪除程式後 , 會出現以下訊息 , 我是在 offline 編輯 , 沒有 連接plc在write mode Unable to communicate with plc. the following reasons may be responsible: communictaion time out . cable trouble. plc power are off or reset status. usb trouble . please restart.

解除方式如下:

Tools->Program Common->勾選 Don't write to PLC

GPPW在 offline/write mode 時 而 Tools->Program Common->勾選 write during RUN GPPW 會寫入 PLC 如果未連PLC,就會出現上述訊息

---